--- title: "Troubleshooting FIPS mode" slug: "troubleshooting-fips-mode" tags: ["ESM", "Install and Get Started"] updated: 2026-09-12T21:29:45Z published: 2026-09-12T21:29:45Z canonical: "docs.trellix.com/troubleshooting-fips-mode" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Troubleshooting FIPS mode Issues might arise when operating Trellix ESM in FIPS mode. ### Can't talk to the Trellix ESM - Check for an error condition on the Trellix ESM FIPS Self-test page. - If a single digit **0** is displayed, indicating that the device has failed a FIPS self-test, reboot the Trellix ESM device and attempt to correct the problem. If the failure condition persists, contact Support for further instructions. - If a single digit **1** is displayed, the communication problem is not due to FIPS failure. Contact Support for further troubleshooting steps. ### Can't talk to the device - If there is a status flag next to the device on the system navigation tree, place the cursor over it. If it says **FIPS Failure**, contact Trellix Support by going to the support portal. - Follow the description under the Can't talk to the Trellix ESM issue. ### **The file is invalid** error when adding a device You can't export a key from a non-FIPS device and import it to a device operating in FIPS mode. Also, you can't export a key from an FIPS device and import it to a non-FIPS device. This error appears when you try either scenario. :