--- title: "Troubleshooting inventory issues" slug: "troubleshooting-inventory-issues-1" tags: ["Product Usage", "ACC 8.4.x"] updated: 2026-09-01T13:05:07Z published: 2026-09-01T13:05:07Z canonical: "docs.trellix.com/troubleshooting-inventory-issues-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Troubleshooting inventory issues There are several methods to troubleshoot inventory issues in your environment. For details about Minimum Data Collection to troubleshoot Trellix Application and Change Control, see [KB90755](https://thrive.trellix.com/s/article/KB90755). Perform the steps in this section if you are experiencing issues with Inventory not present: Verify whether you have modified the **Pull Complete Inventory Interval** value in the Application Control Options policy. Adjust the timing accordingly. Rerun the Inventory Pull task if it fails. - Make sure ePO - On-prem server services are running. - Make sure that the client is solidified. - Verify inventory fetch time (Last and Next). - If inventory time is greater than 7 days, rerun the Pull task. - If the inventory time is less than 7 days, reset the inventory collection timestamps on the client. You can run commands using the local TACC CLI or the ePO client task (`SC: Run Commands`). Before running tasks from ePO - On-prem, ensure the TACC CLI is in the LOCKDOWN state. You can verify this by checking the **Local CLI access** property in the Solidcore product properties for the endpoint; it must be set to **Restricted**. Run these commands to reset the last inventory sync time on the client: - ``` sadmin config set InvDiffLastAccessTime=default ``` - ``` sadmin config set PullInvLastAccessTime=default ``` > [!NOTE] > Note > > The TACC inventory pull policy has a default interval of 7 days. This is configured in the **Solidcore 8.x.x** → **Application Control** → **Application Control Options (Windows)** → **Pull Complete Inventory Interval** setting. You can change this value. However, setting a low interval can cause performance issues when inventory is pulled frequently from many systems. Consider increasing this value as the number of managed systems grows. - On the TACC client, pull the inventory manually by running the following command: `sadmin ls -rax > FILENAME.xml` - Log in to the ePO - On-prem console. - Select **Menu** → **Systems** → **System Tree**. - Locate and select the specific endpoint that matches the **System Name** where you generated the FILENAME.xml file. > [!NOTE] > Note > > Make sure you have selected the correct **System Name**. If you select an incorrect system, the inventory is imported to the wrong managed system. - Select **Actions** → **Application Control** → **Import Inventory**. - In the **Choose File** section, browse to and select the FILENAME.xml file generated on the TACC client, then click **OK**. Confirm that the ePO - On-prem console displays the message: **Inventory imported successfully**. - Wait several minutes for the inventory import to complete. - Verify the import by checking the ePO - On-prem **Audit Log** for the **Import inventory** action status. - If rerunning the inventory pull task does not collect client inventory or display it in the ePO - On-prem console, collect the following information for further analysis: - FILENAME.XML - MER and Gatherinfo from the affected endpoint - MER from the ePO - On-prem server with Orion debug logging enabled (See [KB52369](https://thrive.trellix.com/s/article/KB52369)) For details about Application Control command to reset throttling of events, policy discovery requests (observations), and inventory updates, see [KB84348](https://thrive.trellix.com/s/article/KB84348). To reset the inventory-diff threshold on the endpoint, run the command `sadmin reset-inv-diff-throttle`. Inventory diff generation resumes on the endpoint after executing this command. For details about Application Control Pull Inventory client task overview, see [KB84247](https://thrive.trellix.com/s/article/KB84247). For details about Application Control corrupt inventory fallback process, see [KB88222](https://thrive.trellix.com/s/article/KB88222). ### How to clear inventory time stamp **On ePO - On-prem**: - Create SC: Run the following commands - ``` config set InvDiffLastAccessTime=default ``` - ``` config set PullInvLastAccessTime=default ``` - Send the task to the client. **On Client**: - Open Command Prompt with administrator rights. - Recover the local CLI by executing sadmin recover. A password is needed to unlock the local CLI. - Run the following commands: - ``` sadmin config set InvDiffLastAccessTime=default ``` - ``` sadmin config set PullInvLastAccessTime=default ```