--- title: "Upgrade HA receivers" slug: "upgrade-ha-receivers-1" tags: ["ESM"] updated: 2026-09-12T21:25:04Z published: 2026-09-12T21:25:04Z canonical: "docs.trellix.com/upgrade-ha-receivers-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Upgrade HA receivers Upgrade high availability receivers, starting with the secondary receiver. - Make sure the receivers don't have the same IP address. - The Heartbeat connection requires a network latency of 75 ms or better to prevent high availability receivers fail over and any issues. 1. On the system navigation tree, select the receiver, then click the **Properties** icon ![GUID-F191D568-8B93-4D2C-9BFC-F1342FC407BD-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bb4d6f9c-e211-da56-47b1-210d2bde160b(10).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A44%3A29Z&se=2026-11-22T15%3A44%3A29Z&sr=c&sp=r&sig=amLK8iZUZgfZfCSU08BfC33o33F0ylDeWPXaMI6Fndg%3D). 2. Set the primary receiver to **No Preference**, which allows you to use the **Fail-Over** option. 3. Update the secondary receiver. 1. Click **Receiver Management**, then select **Secondary**. 2. Click **Update Device**, then select or browse to the file you want to use and click **OK**. The receiver restarts and the version of software is updated. 3. On **Receiver Properties**, click High Availability → Return to Service. 4. Select the secondary receiver, then click **OK**. 4. Rey-key the secondary receiver (ESM Properties → ESM Management → Key Management → Regenerate SSH). 5. Return the secondary receiver to service. 6. Change the secondary receiver to primary by clicking High Availability → Fail-Over. 7. Update the other receiver. 1. Click **Receiver Management**, then select **Secondary**. 2. Click **Update Device**, then select or browse to the file you want to use and click **OK**. The receiver restarts and the version of software is updated. 3. On **Receiver Properties**, click High Availability → Return to Service. 4. Select the secondary receiver, then click **OK**. 8. Rekey the device (ESM Properties → ESM Management → Key Management → Regenerate SSH). 9. Return the receiver to service. 10. Change the secondary receiver back to primary by clicking High Availability → Fail-Over. :