--- title: "Upgrade HA receivers when upgrading to 11.6.x version for the first time" slug: "upgrade-ha-receivers-when-upgrading-to-11-6-x-version-for-the-first-time" tags: ["ESM", "Install and Get Started"] updated: 2026-09-12T21:29:45Z published: 2026-09-12T21:29:45Z canonical: "docs.trellix.com/upgrade-ha-receivers-when-upgrading-to-11-6-x-version-for-the-first-time" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Upgrade HA receivers when upgrading to 11.6.x version for the first time Upgrade high availability receivers, starting with the secondary receiver. - Make sure the receivers don't have the same IP address. - The Heartbeat connection requires a network latency of 75 ms or better to prevent high availability receivers fail over and any issues. 1. On the system navigation tree, select the receiver, then click the **Properties** icon ![GUID-F191D568-8B93-4D2C-9BFC-F1342FC407BD-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bb4d6f9c-e211-da56-47b1-210d2bde160b(3).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A24%3A59Z&se=2026-11-22T15%3A24%3A59Z&sr=c&sp=r&sig=IfZdtGFaocJKHIKUYXe7D1Pjf%2BNcDvY3swWb58Xcv%2B0%3D). 2. Set the primary receiver to **No Preference**, which allows you to use the **Fail-Over** option. 3. Update the secondary receiver. 1. Click **Receiver Management**, then select **Secondary**. 2. Click **Update Device**, then select or browse to the file you want to use and click **OK**. The receiver restarts and the version of software is updated. 3. On **Receiver Properties**, click **High Availability** **→** **Return to Service**. 4. Select the secondary receiver, then click **OK**. 4. Rey-key the secondary receiver (**ESM Properties** **→** **ESM Management** **→** **Key Management** **→** **Regenerate SSH**). 5. Return the secondary receiver to service. 6. Update the other receiver. 1. Click **Receiver Management**, then select **Primary**. 2. Click **Update Device**, then select or browse to the file you want to use and click **OK**. The receiver restarts and the version of software is updated. 3. On **Receiver Properties**, click **High Availability** **→** **Return to Service**. 4. Select the secondary receiver, then click **OK**. 7. Rekey the device (**ESM Properties** **→** **ESM Management** **→** **Key Management** **→** **Regenerate SSH**). 8. Return the receiver to service. 9. Change the secondary receiver back to primary by clicking **High Availability** **→** **Fail-Over**. :