--- title: "Using Standard, High Risk, and Low Risk scan processes" slug: "using-standard-high-risk-and-low-risk-scan-processes-6" tags: ["Product Usage", "Endpoint Security (ENS)", "ENS 10.7.x", "ENS-TP 10.7.x"] updated: 2026-08-31T08:48:23Z published: 2026-10-07T18:10:23Z canonical: "docs.trellix.com/using-standard-high-risk-and-low-risk-scan-processes-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Using Standard, High Risk, and Low Risk scan processes Threat Prevention supports different scan processes (Standard, High Risk, and Low Risk) for on-access scanning. These scan processes help achieve a balance between the security and performance impact of scanning. You can either use the Standard scan settings for all processes, or use high-risk, or low-risk processes. You can configure the scan settings depending on the process or program through which a file is accessed. If a process or program doesn't fall under these categories, Threat Prevention applies the standard process settings for scanning. - **Standard process** — Apply the standard scan settings when performing an on-access scanning. - **High Risk** — Identify the high risk process and configure its scan policy. For example, you can add the browser as a high risk process and set its scan policy to scan when it downloads a file. - **Low Risk** — Identify the low risk process and configure its scan policy. For example, you can add the XCode app as a low risk process and set its scan policy to **Do not scan**. The software does not scan when you use XCode.