--- title: "Verify that trace data is transmitting from endpoints to EDR Telemetry Store" slug: "verify-that-trace-data-is-transmitting-from-endpoints-to-edr-telemetry-store" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:31:16Z published: 2026-08-26T19:31:16Z canonical: "docs.trellix.com/verify-that-trace-data-is-transmitting-from-endpoints-to-edr-telemetry-store" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verify that trace data is transmitting from endpoints to EDR Telemetry Store After you complete the Trellix ePO configuration, verify the end-to-end data flow to confirm that endpoints are successfully sending trace data to the EDR Telemetry Store. ### Verify data flow in DXL fabric 1. In Trellix ePO, navigate to **Menu** → **Systems** → **Data Exchange Layer Fabric**. 2. Select an active DXL Broker that has connected endpoints that run **Trellix EDR with Forensics**. 3. Click the **Extensions** tab. 4. Locate the **Last Message Time** and **Messages Processed** columns. 5. Click **Refresh** and verify that the **Messages Processed** count increases. An increase in the count confirms that trace data flows from the endpoints to the EDR Telemetry Store. ### Verify endpoint communication in ePO Check the endpoint's product properties in Trellix ePO to verify that it is actively sending trace data to the ePO Broker. 1. In Trellix ePO, navigate to the **System Tree**. 2. Select an endpoint where **Trellix EDR with Forensics** is installed. 3. Click the **Products** tab and select **Trellix EDR with Forensics**. 4. In the properties list, find **Last Trace Communication**. 5. Verify that the date and time are recent, which confirms the endpoint is successfully delivering its trace data. ### Verify data ingestion on the EDR Telemetry Store 1. Connect to the EDR Telemetry Store and enter configuration mode. Enter the password when prompted after each command. ``` ssh admin@ enable ``` 2. Run the following command to view the EDR Telemetry Store statistics. ``` show opensearch stats ``` 3. From the **OpenSearch Statistics** menu that appears, type `4` and press **Enter** to select **Indices**. 4. **Verify the document count**: In the output table, find the index named **edrf-traces-000001** and check the value in the **docs.count** column. This number should increase over time, confirming that new trace data is being ingested. ![4-VerifyLogs.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b7ca68ec-cd97-8ebd-591b-2123b0a49f8c.png?sv=2026-02-06&spr=https&st=2026-11-19T21%3A13%3A56Z&se=2026-11-19T22%3A13%3A56Z&sr=c&sp=r&sig=9bf%2FrT%2BYriY0OvUCPyGqRXR1jSURdcxO7wFJxyLNpQU%3D)