--- title: "Verify the installation" slug: "verify-the-installation-4" tags: ["Install and Get Started", "TIE 4.5.x"] updated: 2026-09-11T20:08:07Z published: 2026-09-11T20:08:07Z canonical: "docs.trellix.com/verify-the-installation-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verify the installation Make sure that TIE and Trellix DXL components were installed successfully. For troubleshooting any of these steps, see the section **Troubleshooting**. 1. In the **System Tree**, click the TIE server name, then click the **Products** tab. Verify that the following components are listed with the corresponding version for the installation process: - **Trellix DXL Broker** (if configured when deploying the appliance) - **Trellix DXL Client** - **Trellix Threat Intelligence Exchange Server** 2. In the **System Tree**, on the **Tags** column, verify that the tags are applied correctly to the deployed systems. 3. Verify that the **DXL Topology** settings and the **DXL Fabric** are configured correctly. 1. In the **System Tree**, select the TIE server, then from the **Actions** menu, select **DXL** → **Lookup in DXL**. Verify that the connection state is **Connected**. 2. Verify that the Trellix DXL broker is running. Select **Menu** → **Systems** → **TIE Reputations** to verify that you can search for files and certificates. It might take some time for reputation information to populate the database. 4. Select **Menu** → **Configuration** → **Server Settings**, then click **DXL Client for ePO**. Verify that the **Connection State** is **Connected**. 5. Select **Menu** → **Configuration** → **Server Settings** → **TIE Server Topology Management** and verify that the operation mode of your TIE server instances have changed based on your edit. 6. Select **Menu** → **Configuration** → **Server Settings**, then click on each server and verify that it is running. Make sure the health check status is **OK** on the **TIE Server Topology Management** page.