--- title: "View status of Network Time Protocol (NTP) servers" slug: "view-status-of-network-time-protocol-ntp-servers-1" tags: ["ESM"] updated: 2026-09-24T09:12:53Z published: 2026-09-24T09:12:53Z canonical: "docs.trellix.com/view-status-of-network-time-protocol-ntp-servers-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # View status of Network Time Protocol (NTP) servers View the status of Network Time Protocol (NTP) servers on Trellix ESM. Add NTP servers to Trellix ESM or devices. > **Note** > > It can take up to 10 minutes for changes to appear. 1. Select System Properties → System Information, then click **System Clock**. 2. Click **Status**. - **NTP Server** column: - * — Server currently being referenced - + — Selected, included in the final set - # — Selected, distance exceeds maximum value - o — Selected, Pulse Per Second (PPS) used - x — Source false ticker - . — Selected from end of candidate list - - — Discarded by cluster algorithm - **Reachable** column: - Yes — server can be reached - No — server cannot be reached - **Authentication** column: - none — no credentials exist - bad — incorrect credentials - yes — correct credentials - **Condition** column (Condition corresponds to the mark in the **NTP Server** column): - candidate — possible choice - sys.peer — current choice - reject — cannot be reached. If all servers are selected **reject**, it's possible that the NTP configuration is restarting. :