--- title: "2. Remove and replace the Active Fail-Open module from the chassis" slug: "2-remove-and-replace-the-active-fail-open-module-from-the-chassis" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:11Z published: 2026-10-05T15:41:11Z canonical: "docs.trellix.com/2-remove-and-replace-the-active-fail-open-module-from-the-chassis" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # 2. Remove and replace the Active Fail-Open module from the chassis Follow the steps in this section to remove and replace the Active Fail-Open module. ## Task 1. **To remove:** Slide the module out from any one of the two slots it is installed without shutting down the chassis. 2. **To replace:** Slide in the module into one of the three slots in the chassis while the power is on. > [!NOTE] > Note > > If a new module is installed in the slot or a different type of module is installed from the previous ones, a chassis reboot is required to make the newly inserted module active.