--- title: "40to10conversion" slug: "40to10conversion-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/40to10conversion-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # 40to10conversion Use this command to convert G0 ports (G0/1 and G0/2) on NS9x00 Sensors to run in 10 Gigabit Ethernet mode instead of the 40 Gigabit Ethernet mode. > [!NOTE] > Note > > This configuration persists across Sensor reboots. > [!NOTE] > Note > > A separate adaptor is needed to convert QSFP interface into a SFP+ interface. Contact Support for more information. **Syntax:** `40to10conversion <enable|disable>` **Applicable to:** NS9100 and NS9200 Sensors.