--- title: "6. Use the Web Manager to configure the fail-open switch" slug: "6-use-the-web-manager-to-configure-the-fail-open-switch-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:40Z published: 2026-11-19T12:29:40Z canonical: "docs.trellix.com/6-use-the-web-manager-to-configure-the-fail-open-switch-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # 6. Use the Web Manager to configure the fail-open switch Besides using CLI commands, you can view and configure fail-open switch settings for an active fail-open switch through a web console called the Web Manager. You can restrict or permit access to the Web Manager depending on your preferences. The web interface for fail-open switch model1 allows you to manage the following functions: - Configuration of general fail-open switch parameters, such as IPv4 address, subnet mask, and gateway IPv4 address. - Enabling tap mode for the fail-open switch - Returning from tap mode to inline mode - Configuration of notifications through SNMP traps Follow these steps to access the Web Manager. 1. Open a browser such as Internet Explorer or Mozilla Firefox. 2. In the address bar, enter the fail-open switch IP address. You will be prompted for the username and password. 3. Enter the username and password. The default username and password are `Trellix`. 4. Submit credentials. The Web Manager appears where you can modify the fail-open switch parameters. **Web Manager page - Upper half**![Web Manager page - Upper half](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-71f5513e-dad1-bce0-ad73-13ba08483c8c(7).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A50%3A56Z&se=2026-11-20T14%3A50%3A56Z&sr=c&sp=r&sig=urpo1SzT2dItx45am1wtWIE1KI6KsIW4bvL8NM1a6Qw%3D)