--- title: "7. Use the web interface to configure the Active Fail-Open module" slug: "7-use-the-web-interface-to-configure-the-active-fail-open-module-5" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/7-use-the-web-interface-to-configure-the-active-fail-open-module-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # 7. Use the web interface to configure the Active Fail-Open module Besides using CLI commands, you can view and configure Active Fail-Open module settings for the Active Fail-Open chassis through a web console. The web interface for the Active Fail-Open modules 16 and 17 allows you to manage the following functions: - Enabling bypass/tap mode for the Active Fail-Open module - Returning from bypass/tap mode to inline mode - Configuration of notifications through SNMP traps The next section explains the steps for each of these management options.