--- title: "7. Use the web interface to configure the fail-open switch" slug: "7-use-the-web-interface-to-configure-the-fail-open-switch-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/7-use-the-web-interface-to-configure-the-fail-open-switch-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # 7. Use the web interface to configure the fail-open switch Besides using CLI commands, you can view and configure the fail-open switch settings for a fail-open switch through a web console. The web interface for fail-open switch models 6 thru 10 allows you to manage the following functions: - Configuration of general fail-open switch parameters, such as IPv4 address, subnet mask, and gateway IPv4 address - Enabling tap mode for the fail-open switch - Returning from tap mode to inline mode - Configuration of notifications through SNMP traps The next section explains the steps for each of these management options.