--- title: "A" slug: "a-1" updated: 2026-08-25T13:50:04Z published: 2026-08-25T13:50:04Z canonical: "docs.trellix.com/a-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # A ### Access protections for SSH keys For compliance, user access to SSH keys and debug data must be disabled. ##### Standards CC-NDcPP ##### CLI configuration command `no compliance options user-key-access enable` ##### CLI show commands `show compliance options` `show running-config` ### Audit logging priority levels For compliance, audit logging must be enabled at the priority level “notice” or “info.” This change is applied to local logging and to any configured remote syslog servers. All local log sinks must be logging at a compliant priority. For remote logging, at least one logging host must be logging at a compliant priority. ##### Standards FIPS 140-3, CC-NDcPP ##### CLI configuration commands `logging local notice` If class overrides are configured, set the priority to notice: `logging local override class <class-name> priority notice` `logging local override class <class-name> priority notice` If a logging host is defined: `logging <host> trap notice` If class overrides are configured, set the priority to notice: `logging <host> trap override` `logging <host> trap override class <class-name> priority notice` ##### CLI show command `show logging` ### Audit logging of secure channels For compliance, audit information is changed regarding the establishment, termination, and failure of secure TLS and SSH channels. ##### Standards CC-NDcPP ##### CLI configuration command `compliance options secure-channel-logs enable` ##### CLI show command `show compliance options` :