--- title: "aaa authorization access-groups area alerts enable force" slug: "aaa-authorization-access-groups-area-alerts-enable-force" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:03Z published: 2026-08-04T17:22:03Z canonical: "docs.trellix.com/aaa-authorization-access-groups-area-alerts-enable-force" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # aaa authorization access-groups area alerts enable force Enables the access groups for alerts feature without requiring the user to confirm the action. The feature is disabled by default. > [!WARNING] > Important > > Configure access groups before you enable them. If you enable access groups before they are configured, analyst and monitor users will have no access to alerts. If access groups are configured but not enabled, analyst and monitor users will have access to all alerts. > [!NOTE] > Note > > Use the `no aaa authorization access-groups area alerts enable` command to disable access groups for alerts. ### Syntax ``` aaa authorization access-groups area alerts enable force ``` ### Parameters None ### Example The following example enables access groups for alerts on the cm-06 appliance. ``` cm-06 (config) # aaa authorization access-groups area alerts enable force ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Central Management System:** Release 8.2.0