--- title: "aaa authorization certificate map-ldap enable" slug: "aaa-authorization-certificate-map-ldap-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:07Z published: 2026-08-04T17:22:07Z canonical: "docs.trellix.com/aaa-authorization-certificate-map-ldap-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # aaa authorization certificate map-ldap enable Enables the LDAP server to map a remote user to a local user account for certificate authentication. The LDAP server is used to authorize users that are already authenticated using the X.509 certificate. For details about configuring LDAP authorization for certificate authentication, refer to the "Configuring CAC for Certificate Authentication" appendix of the *System Administration Guide*. > [!NOTE] > Note > > This command is not currently used on the Intelligent Virtual Execution - Server compute node. ### Syntax `[no] aaa authorization certificate map-ldap enable` ### Parameters `no` Use the no form of this command to disable the LDAP server for certificate authentication. ### Example The following example shows how to enable the LDAP server to map a remote user to a local user account for certificate authentication. ``` hostname (config) # aaa authorization certificate map-ldap enable ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Central Management System:** Release 7.9.1 - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Release 7.9.1 - **Intelligent Virtual Execution - Server:** Release 7.9.1 - **Email Security — Server:** Release 7.9.0