--- title: "About connecting cables to the Monitoring ports" slug: "about-connecting-cables-to-the-monitoring-ports-1" tags: ["Hardware"] updated: 2026-08-19T17:31:47Z published: 2026-09-17T10:37:49Z canonical: "docs.trellix.com/about-connecting-cables-to-the-monitoring-ports-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # About connecting cables to the Monitoring ports Connect to the network devices that you want to monitor through the Sensor monitoring ports. You can deploy Sensors in the following operating modes: - **Inline Fail Open** - **Inline Fail Open – Active** - **Inline Fail Closed** - **SPAN or Hub** - **Tap**