--- title: "About connecting cables to the Monitoring ports" slug: "about-connecting-cables-to-the-monitoring-ports-2" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-08-19T18:03:05Z published: 2026-09-17T09:43:59Z canonical: "docs.trellix.com/about-connecting-cables-to-the-monitoring-ports-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # About connecting cables to the Monitoring ports Connect to network devices that will send traffic to the Sensor monitoring ports. You can deploy Sensors in the following operating modes: - **Inline Fail Open** - **Inline Fail Open – Active** - **Inline Fail Closed** - **SPAN or Hub** - **Tap**