--- title: "About connecting cables to the Monitoring ports" slug: "about-connecting-cables-to-the-monitoring-ports-6" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-08-19T18:01:59Z published: 2026-09-17T09:43:59Z canonical: "docs.trellix.com/about-connecting-cables-to-the-monitoring-ports-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # About connecting cables to the Monitoring ports Connect to the network devices that you want to monitor through the Sensor monitoring ports. You can deploy Sensors in the following operating modes: - In-line mode (fail-close) - In-line mode (fail-open) - External tap mode - SPAN or hub mode