--- title: "About connecting cables to the Monitoring ports" slug: "about-connecting-cables-to-the-monitoring-ports-8" tags: ["Hardware"] updated: 2026-08-19T17:19:13Z published: 2026-09-17T09:54:44Z canonical: "docs.trellix.com/about-connecting-cables-to-the-monitoring-ports-8" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # About connecting cables to the Monitoring ports Connect to the network devices that you want to monitor through the Sensor monitoring ports. You can deploy Sensors in the following operating modes: - In-line mode (fail-close) - In-line mode (fail-open or fail-open active) - Tap mode - SPAN or hub mode