--- title: "About enabling SmartVision" slug: "about-enabling-smartvision" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:05Z published: 2026-09-02T17:27:05Z canonical: "docs.trellix.com/about-enabling-smartvision" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # About enabling SmartVision When deploying SmartVision appliances, you must be aware of the following behaviors: ### Default Settings - SmartVision is enabled by default on SmartVision Edition appliances. - On SmartVision-capable Network Security sensors and integrated appliances, SmartVision is disabled by default. - ### Note The Web UI **Alerts > SmartVision** page and **Settings > SmartVision** page are accessible even when SmartVision is disabled. ### Enabling and disabling - On SmartVision-capable Network Security sensors and integrated appliances, or if SmartVision has been explicitly disabled, you must use the **Setting >** **SmartVision** **Configuration** page or CLI commands to explicitly enable SmartVision features. - On SmartVision Edition appliances, features are enabled by default. If SmartVision has been explicitly disabled on a SmartVision Edition sensor, you must use the **Setting >** **SmartVision** **Configuration** page or CLI commands to explicitly enable SmartVision features. - SmartVision features and data exfiltration detection are enabled and disabled independently of one another. ### Average EPS and recommended maximum EPS - Before you deploy a SmartVision appliance to a production environment, make sure that the average events per second (EPS) measured on the appliance does not exceed the recommended maximum EPS. See [Checking the average EPS using the CLI](/docs/checking-the-average-eps-using-the-cli). :