--- title: "About fiber-optic ports" slug: "about-fiber-optic-ports-6" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:52Z published: 2026-09-17T09:43:52Z canonical: "docs.trellix.com/about-fiber-optic-ports-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # About fiber-optic ports The Sensor uses fiber-optic connectors for its Monitoring ports. The connector and compatible cable types are below: | Connector | Cable | | --- | --- | | QSFP28 | MPO/MTP and LC-duplex | | QSFP+ | LC-duplex and MPO/MTP | | SFP/SFP+ | LC-duplex | Note the following: - Fiber-optic ports (for example, SFP/SFP+/QSFP+/ QSFP28, FDDI, OC-3, OC-12, OC-48, ATM, GBIC, and 100BaseFX) are considered Class 1 laser or Class 1 LED ports. - These products have been tested and found to comply with Class 1 limits of IEC 60825-1, IEC 60825-2, EN 60825-1, EN 60825-2, and 21CFR1040. > [!WARNING] > Caution > > To avoid exposure to radiation, do not stare into the aperture of a fiber-optic port. Invisible radiation could be emitted from the aperture of the port when no fiber cable is connected. - Only FDA registered, EN 60825-1 and IEC 60825-1 certified Class 1 SFP/SFP+/QSFP+/QSFP28 laser transceivers are acceptable for use with the Sensor.