The Sensor uses fiber-optic connectors for its Monitoring ports. The connector type is an SFP/SFP+/QSFP+ fiber optic connector that is LC-duplex compatible.
Note the following:
Fiber-optic ports (for example, SFP/SFP+/QSFP+, FDDI, OC-3, OC-12, OC-48, ATM, GBIC, and 100BaseFX) are considered Class 1 laser or Class 1 LED ports.
These products have been tested and found to comply with Class 1 limits of IEC 60825-1, IEC 60825-2, EN 60825-1, EN 60825-2, and 21CFR1040.
Caution
To avoid exposure to radiation, do not stare into the aperture of a fiber-optic port. Invisible radiation could be emitted from the aperture of the port when no fiber cable is connected.
Only FDA registered, EN 60825-1 and IEC 60825-1 certified Class 1 SFP/SFP+/QSFP+ laser transceivers are acceptable for use with the Sensor.