--- title: "About fiber-optic ports" slug: "about-fiber-optic-ports" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/about-fiber-optic-ports" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # About fiber-optic ports The Sensor uses fiber-optic connectors for its Monitoring ports. The connector type and compatible cable types are below: | Connector | Cable | | --- | --- | | QSFP28 | LC-duplex and MTP/MPO | | QSFP+ | Note the following: - Fiber-optic ports (for example, QSFP+/ QSFP28, FDDI, OC-3, OC-12, OC-48, ATM, GBIC, and 100BaseFX) are considered Class 1 laser or Class 1 LED ports. > [!WARNING] > Caution > > To avoid exposure to radiation, do not stare into the aperture of a fiber-optic port. Invisible radiation could be emitted from the aperture of the port when no fiber cable is connected. - Only FDA registered, EN 60825-1 and IEC 60825-1 certified Class 1 QSFP+/QSFP28 laser transceivers are acceptable for use with the Sensor.