--- title: "Accepting a management request using the Central Management System CLI" slug: "accepting-a-management-request-using-the-central-management-system-cli-3" updated: 2026-08-25T21:17:55Z published: 2026-08-25T21:17:55Z canonical: "docs.trellix.com/accepting-a-management-request-using-the-central-management-system-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Accepting a management request using the Central Management System CLI Use the commands in this section to accept or reject a request by an appliance to be added to the Central Management System appliance for management. ### Note If the Central Management System appliance has never accepted a request for management, ensure that it meets the requirements described in [Preparing to Accept a Management Request](/docs/preparing-to-accept-a-management-request-using-the-cli). Ta accept a request to be managed: 1. Log in to the Central Management System CLI. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. View the list of requests: ``` cm-hostname (config) show cmc rendezvous ``` 4. Accept one or more requests. - To accept a specific appliance: ``` cm-hostname (config) # cmc rendezvous server accept client ``` where` <hostname> `is the hostname of the requesting appliance. - To accept all appliances in the list: ``` cm-hostname (config) # cmc rendezvous server accept all ``` 5. Save your changes. ``` hostname (config) # write memory ``` To reject a request to be managed: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. View the list of requests: ``` cm-hostname (config) # show cmc rendezvous ``` 3. Reject one or more requests: - To reject a specific appliance: ``` cm-hostname (config) # no cmc rendezvous server accept client ``` where` <hostname> `is the hostname of the requesting appliance. - To reject all appliances in the list: ``` cm-hostname (config) # no cmc rendezvous server accept all ``` 4. Save your changes. ``` hostname (config) # write memory ``` ### Example In this example, the request from the nx-02 appliance is accepted and the request from the nx-04 appliance is rejected. ``` hostname (config) # show cmc rendezvous CMC rendezvous service name: cmc CMC server:   Server rendezvous enabled: yes   Auto-accept enabled:       no Clients waiting approval: nx-02 (172.14.10.00) nx-04 (172.14.20.00) ... hostname (config) # cmc rendezvous server accept client nx-02 hostname (config) # no cmc rendezvous server accept client nx-04 hostname (config) # write memory ``` :