--- title: "Accepting a management request using the Central Management System Web UI" slug: "accepting-a-management-request-using-the-central-management-system-web-ui-3" updated: 2026-08-25T21:17:55Z published: 2026-08-25T21:17:55Z canonical: "docs.trellix.com/accepting-a-management-request-using-the-central-management-system-web-ui-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Accepting a management request using the Central Management System Web UI Use the **Connection Requests** dialog box to accept (or reject) a request to be managed. ![CM_JoinList_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-17846aba-ed82-3de8-cd50-1b8154bd665b.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A03%3A58Z&se=2026-11-20T08%3A03%3A58Z&sr=c&sp=r&sig=aghZ4lYIoQ8jvxDjdG1S12QhdXRr1E549uFPZtyk6q8%3D) If any requests from appliances are waiting for approval, a message is displayed in the notification bell at the top right of the Central Management System Web UI. ![CM_AcceptMgtRequestMsg__scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-606a3ce0-8c6c-f8fc-26ab-0d34fb731f01.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A03%3A58Z&se=2026-11-20T08%3A03%3A58Z&sr=c&sp=r&sig=aghZ4lYIoQ8jvxDjdG1S12QhdXRr1E549uFPZtyk6q8%3D)To accept a request to be managed from an appliance: 1. If the Central Management System appliance has never accepted a request for management, ensure that it meets the requirements described in [Preparing the to Accept a Management Request](/docs/preparing-to-accept-a-management-request-using-the-cli) . 2. Log in to the Central Management System Web UI. 3. Do one of the following to open the **Connection Requests** dialog box: - Click the button in the Dashboard message. - Click the **Appliances** tab. The **Sensors** tab should be selected. Click **Actions** > **Waiting Connection Requests**. The IP address and hostname of the requesting appliance are displayed. 4. To approve the request and add the appliance: The appliance is added to the list on the page, and it becomes a member of the system group for that appliance type. The appliance hostname becomes the display name shown in the **Sensor** column. You can add the appliance to a different group or create a new group for the appliance as described in [Grouping Appliances](/docs/grouping-appliances). 1. Select its checkbox and then click **Accept**. 2. When prompted, confirm your action. 5. To reject the request (for example, if you do not recognize the appliance): 1. Select its checkbox and then click **Reject**. 2. When prompted, confirm your action. ### Note For information about the status indicators and the actions available from this page, see [Viewing Managed Appliance Information Using the Web UI](/docs/viewing-managed-appliance-information-using-the-web-ui) . :