--- title: "Accepting a management request in a NAT deployment using the Central Management System CLI" slug: "accepting-management-request-nat-deployment-central-management-cli-2" updated: 2026-08-25T21:18:25Z published: 2026-08-25T21:18:25Z canonical: "docs.trellix.com/accepting-management-request-nat-deployment-central-management-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Accepting a management request in a NAT deployment using the Central Management System CLI Use the commands in this section to accept or reject a request by an appliance to be added to the Central Management System appliance for management. To accept a request to be managed: 1. If the Central Management System appliance has never accepted a request for management, ensure that it meets the requirements described in [Preparing to Accept a Management Request](/docs/preparing-to-accept-a-management-request-using-the-cli). 2. Log in to the Central Management System CLI. 3. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 4. Accept one or more requests. - To accept a specific appliance: ``` cm-hostname (config) # cmc rendezvous server accept client ``` where` <hostname> `is the hostname of the requesting appliance. Do not specify the IP address, because multiple appliances behind the same NAT gateway have the same IP address. - To accept all appliances in the list: ``` cm-hostname (config) # cmc rendezvous server accept all ``` 5. Save your changes. ``` hostname (config) # write memory ``` To reject a request from an appliance to be managed: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. View the list of requests: ``` cm-hostname (config) # show cmc rendezvous ``` 1. Reject one or more requests: - To reject a specific appliance: ``` cm-hostname (config) # no cmc rendezvous server accept client ``` where` <hostname> `is the hostname of the requesting appliance. Do not specify the IP address, because multiple appliances behind the same NAT gateway have the same IP address. - To reject all appliances in the list: ``` cm-hostname (config) # no cmc rendezvous server accept all ``` 2. Save your changes. ``` hostname (config) # write memory ``` ### Example In this example, the request from the nx-02 appliance is accepted and the request from the nx-04 appliance is rejected. ``` cm-hostname (config) # show cmc rendezvous CMC rendezvous service name: cmc CMC server:   Server rendezvous enabled: yes   Auto-accept enabled:       no Clients waiting approval: nx-02 (3.3.3.6) nx-04 (3.3.3.6) ... cm-hostname (config) # cmc rendezvous server accept client nx-02 cm-hostname (config) # no cmc rendezvous server accept client nx-04 cm-hostname (config) # write memory ``` :