--- title: "Access the Active Fail-Open module web interface" slug: "access-the-active-fail-open-module-web-interface-4" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:02Z published: 2026-11-19T12:29:02Z canonical: "docs.trellix.com/access-the-active-fail-open-module-web-interface-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Access the Active Fail-Open module web interface If you have configured an IPv4 address for your Active Fail-Open chassis, you have the option to manage it through a web interface. **Steps:** 1. To access the Active Fail-Open module web interface, enter the IPv4 address of the Active Fail-Open chassis which you have configured through **https://x.x.x.x.** The Active Fail-Open module web interface appears on the login screen. 2. To log in, enter the default username and password, `Trellix00` and `Trellix00`. You are routed to the Active Fail-Open web interface landing page which shows you information about the present settings configured in the Active Fail-Open module. Configuration of necessary settings is explained in the relevant sections. ![GUID-2D0F516A-8EFB-4368-BB2A-32C38F63AEB8-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-18f1724d-d290-6719-de11-93424f5f832e(7).jpg?sv=2026-02-06&spr=https&st=2026-11-20T13%3A59%3A03Z&se=2026-11-20T14%3A59%3A03Z&sr=c&sp=r&sig=PCMC4TwXjj6mpaF4rXm7DOSTLRCsJ9O4%2Fe05qHdJ4Y8%3D) | Callout | Description | | --- | --- | | 1 | Active State: - Inline - Sensor receives traffic and the fail-open module is operating in normal mode - Bypass - Sensor does not receive traffic and the fail-open module is not operating in inline mode - Tap - Fail-open module functioning like a TAP kit | | 2 | Passive State: - Inline - Fail-open module operating in normal mode - Bypass - Sensor does not receive traffic and the fail-open module is not operating in inline mode | | 3 | Appl (Application) state: - Active - Monitoring ports are up and the heartbeat packets are received - Fail - Monitoring ports are up, but the heartbeat packets are not received - Unknown - Monitoring ports are down | | 4 | Power status: - Fail - No power provided to the power supply - Ok - The power supply is normal | | 5 | The 40G Active Fail-Open chassis consists of 3 modules. Select the module from the **Module: Segment** drop-down list. |