--- title: "Accessing the device serial console" slug: "accessing-the-device-serial-console-2" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-10-01T12:06:51Z published: 2026-10-01T12:06:51Z canonical: "docs.trellix.com/accessing-the-device-serial-console-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Accessing the device serial console This procedure describes how to use the IPMI interface to access the File Protect appliance through a serial console. ### Important Use the IPMI Web UI to access the compute node serial console only during a power or system reset or when the system is not otherwise responding on the management interface. Prerequisites - You are logged in to the appliance IPMI. - The appliance is not using its management interface. To access the serial console: ### Important Use the IPMI Web UI to access the serial console only during a power or system reset or when the system is not otherwise responding on the management interface. 1. Click the **Remote Control** tab. 2. Click **Console Redirection** in the sidebar. ![All_IPMIConsole_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-1263011c-6e41-97ca-cfc7-14b38b08c3d3(7).png?sv=2026-02-06&spr=https&st=2026-11-20T04%3A17%3A11Z&se=2026-11-20T05%3A17%3A11Z&sr=c&sp=r&sig=PSJdpNpNHzb1bAweRmlS72s20J4Mx5nk%2Fpofwv2X3ng%3D) 3. Click **Launch Console**. You might be prompted to install a Java program to launch the console, which could require changes to your Java security settings. If your security policy does not allow this, and if your appliance uses a recent IPMI firmware version, you can instead open ports on the firewall. To view the installed and available firmware versions, click **System** and then **System Information**, or follow the instructions in [IPMI and BIOS firmware updates](/network-and-platform/docs/ipmi-and-bios-firmware-updates). :