--- title: "Accessing vIPS Components using SSH" slug: "accessing-vips-components-using-ssh" tags: ["Product Usage", "vIPS 10.1.10"] updated: 2026-09-11T20:35:28Z published: 2026-09-11T20:35:28Z canonical: "docs.trellix.com/accessing-vips-components-using-ssh" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Accessing vIPS Components using SSH ## Before you begin Make sure you have the SSH key file saved in the virtual machine from were you are accessing the External Controller shell. ## Task 1. Access the virtual machine deployed in your cloud environment using Remote Desktop. 2. Open the SSH client. > [!NOTE] > Note > > Trellix recommends you to use Xshell application as your SSH client. 3. Accessing vIPS Components using the following commands: | Option | Description | | --- | --- | | File_path_for_the_ssh_key | Filepath in the virtual machine for the SSH key | | Sensor_IP_Address | Private IP address of the Virtual IPS Sensor | - For a Manager/Internal Controller, ssh -i <File_path_for_the_ssh_key> admin@<Manager_IP_Address> > [!NOTE] > Note > > The Local Controller shell resides in the Linux based Manager. Use SSH to access the Manager shell to run the Controller shell commands. - For an External Controller, ssh -i <File_path_for_the_ssh_key> admin@<External_Controller_IP_Address> - For a Sensor, ssh -i <File_path_for_the_ssh_key> admin@<Sensor_IP_Address>