--- title: "Activating a Web server CA certificate chain using the CLI" slug: "activating-a-web-server-ca-certificate-chain-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:07Z published: 2026-09-01T19:03:07Z canonical: "docs.trellix.com/activating-a-web-server-ca-certificate-chain-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Activating a Web server CA certificate chain using the CLI Use the commands in this section to activate a Web server CA certificate chain. To activate a Web server CA certificate chain: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Activate the certificate chain: ``` hostname (config) # web server ssl ca-chain ``` where: - `chainName `is a unique name for the CA certificate chain. The name must begin with a letter or number. The remaining characters in the name can be letters, numbers, periods (`.`), dashes (`-`), and underscores (`_`). 3. Verify your change: ``` hostname (config) # show web ``` 4. Save your changes: ``` hostname (config) # write memory ``` To deactivate a Web Server CA certificate chain: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Deactivate the chain: ``` hostname (config) # no web server ssl ca-chain ``` ### Example The following example activates the "apache01" certificate chain. ``` hostname (config) # web server ssl ca-chain apache01 ``` :