--- title: "Active Fail-Open kit module is stuck in bypass mode" slug: "active-fail-open-kit-module-is-stuck-in-bypass-mode-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:51Z published: 2026-11-19T12:30:51Z canonical: "docs.trellix.com/active-fail-open-kit-module-is-stuck-in-bypass-mode-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Active Fail-Open kit module is stuck in bypass mode Links between Sensor and Active Fail-Open module Mon0/Mon1 are up but the Sensor is not receiving any traffic from the Active Fail-Open module. When this occurs, the **BYP/TAP/DISC** LED is **Amber** and **INLINE** LED is **OFF**. You can troubleshoot the issue using the following two methods: - At the CLI, run the following commands: 1. `get_hb_act_mode` - If `HB active mode` is `off`, enter the next command. 2. `get_bypass_mode` - If `Active state` is `bypass`, enter the next command. 3. `set_hb_act_mode on` - From the web interface: 1. Check if the **Active State** is in **Inline** or **Bypass** or **Tap**. ![GUID-3DD061B8-CA4C-4AAA-8856-FA5175D4654B-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-25e57445-a7ba-dcfa-5477-475c8be204b4(7).png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A04%3A56Z&se=2026-11-20T15%3A04%3A56Z&sr=c&sp=r&sig=FPMKoFdstbQppafb95S%2FLS2al1Z%2BGN1Os381D%2FAvZrE%3D) 2. Check if the **Appl State** is **unknown**. This means that the module in forced bypass state. 3. In the **Bypass** page, confirm that **HB active mode** is set to **ON**. ![GUID-9F424E98-AB7C-4C0B-8504-858085C19375-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3238466f-489b-def4-4b17-c78f7e8df471(7).png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A04%3A56Z&se=2026-11-20T15%3A04%3A56Z&sr=c&sp=r&sig=FPMKoFdstbQppafb95S%2FLS2al1Z%2BGN1Os381D%2FAvZrE%3D)