---
title: "Add a deleted Sensor back to the Manager"
slug: "add-a-deleted-sensor-back-to-the-manager"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:41:16Z
published: 2026-10-05T15:41:16Z
canonical: "docs.trellix.com/add-a-deleted-sensor-back-to-the-manager"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Add a deleted Sensor back to the Manager
If you deleted a Sensor from the Manager and want to re-add it, you must reset the shared key value on the Sensor to re-establish secure communication between the Sensor and Manager.
## Task
1. Connect a terminal to the Sensor Console port. (For instructions on connecting to the Console port, see the corresponding
Trellix Intrusion Prevention System Sensor Product Guide.)
2. At the login prompt, log on to the Sensor.
3. Clear the certificates used for communication with the Sensor. At the prompt, type
deinstall.
4. Type
show to see the current configuration information for the Sensor.
Modify it as needed.
5. Re-enter the shared key information for the Sensor.
At the command prompt, type
set sensor sharedsecretkey <WORD>.
This value is used to establish a trust relationship between the Sensor and the Manager. The secret key value can consist of up to 25 characters of any ASCII text. The shared key value is case-sensitive.
Example:
set sensor sharedsecretkey IPSkey123.
6. To exit the session, type
exit.
7. Re-add the Sensor to the Manager as described in
Adding a Sensor to the Manager.