--- title: "Add a device logon banner" slug: "add-a-device-logon-banner" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:58Z published: 2026-10-05T15:39:58Z canonical: "docs.trellix.com/add-a-device-logon-banner" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a device logon banner Trellix IPS supports display of messages on the Sensor CLI while logging onto the device. You can customize the message using the Manager. > [!NOTE] > Note > > Support for device **Banner** is available for all the hardware devices. ## Task 1. Select **Devices** → **** → **Global** → **Common Device Settings** → **Remote Access** → **Logon Banner**. A default **Logon Banner** message is displayed. ![add_sensor_banner](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-14B458C2-974A-4206-8BFE-05D123E41504-low.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A48%3A40Z&se=2026-11-22T14%3A48%3A40Z&sr=c&sp=r&sig=lOgCwO0GlboP8dj44Ca6VCVi4Q8mEikjXcuhzgP9qt4%3D) 2. Type a text message that you would like to display on the Sensor CLI. You can enter up to 2048 characters. 3. Click **Save** to save the customized message. Click **Reset to System Default** to restore the default **Logon Banner** message. 4. Select **Devices** → **** → **Devices** → **** → **Deploy Pending Changes**. 5. View the update information, and select the **Configuration and Signature Set** checkbox. 6. Click **Update**. 7. Log onto the Sensor CLI to view the customized message. ![sensor_banner_cli](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-3411F593-D4A2-4B20-B153-6C7B1CA94657-low.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A48%3A40Z&se=2026-11-22T14%3A48%3A40Z&sr=c&sp=r&sig=lOgCwO0GlboP8dj44Ca6VCVi4Q8mEikjXcuhzgP9qt4%3D) The customized message is displayed on all devices configured to the Manager, and persists across upgrade/downgrade as well as after a reboot until **Reset to System Default** from the Manager.