--- title: "Add a network from Logon Control" slug: "add-a-network-from-logon-control-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:35Z published: 2026-11-19T12:28:35Z canonical: "docs.trellix.com/add-a-network-from-logon-control-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a network from Logon Control You can enter IPv4 or IPv6 address in the **Logon Control** page in Manager. To add a network in the **Logon Control** page, do the following: **Steps:** 1. Select **Manager** → **** → **Setup** → **GUI Access** → **Logon Control**. > [!NOTE] > Note > > In the Central Manager, select **Central Manager** → **Setup** → **GUI Access** → **Logon Control**. The fields displayed are similar to that in Manager, explained below. 2. Click ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a265d0b5-4039-16f5-7bb1-cb4512697e13(8).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A06%3A50Z&se=2026-11-20T13%3A06%3A50Z&sr=c&sp=r&sig=n26cOdM5z1qLa8KFoObkCCz6ZYFoUZdzdsyAizov9BA%3D). The **Add a Network** page is displayed. **Add a Network Dialog**![Add a Network Dialog](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-036f1bed-bd8f-0e8c-11d7-93dd0e6e3660(7).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A06%3A50Z&se=2026-11-20T13%3A06%3A50Z&sr=c&sp=r&sig=n26cOdM5z1qLa8KFoObkCCz6ZYFoUZdzdsyAizov9BA%3D) 3. In **Network**, enter the IP address (IPv4 or IPv6) and the prefix length. Enter a **Description** (optional). 4. Click **Save**.