--- title: "Add a network from Logon Control" slug: "add-a-network-from-logon-control" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:58Z published: 2026-10-05T15:39:58Z canonical: "docs.trellix.com/add-a-network-from-logon-control" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a network from Logon Control You can enter IPv4 or IPv6 address in the **Logon Control** page in Manager. To add a network in the **Logon Control** page, do the following: ## Task 1. Select **Manager** → **** → **Setup** → **GUI Access** → **Logon Control**. > [!NOTE] > Note > > In the Central Manager, select **Central Manager** → **Setup** → **GUI Access** → **Logon Control**. The fields displayed are similar to that in Manager, explained below. 2. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A6ACF06E-8B7C-4F33-9335-99E4B1FDEB3D-low(2).png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A42%3A31Z&se=2026-11-22T14%3A42%3A31Z&sr=c&sp=r&sig=qzbQMKk6Z3bXtRtj%2F7NoxW%2BcO%2F30ru6BH0lEtJ6CVGI%3D). The **Add a Network** page is displayed. Add a Network Dialog ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A8319F8F-A30D-4E14-8698-BBD06365EB1D-low.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A42%3A31Z&se=2026-11-22T14%3A42%3A31Z&sr=c&sp=r&sig=qzbQMKk6Z3bXtRtj%2F7NoxW%2BcO%2F30ru6BH0lEtJ6CVGI%3D) 3. In **Network**, enter the IP address (IPv4 or IPv6) and the prefix length. Enter a **Description** (optional). 4. Click **Save**.