--- title: "Add a new NMS IP address" slug: "add-a-new-nms-ip-address-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:53:46Z published: 2026-11-19T12:53:46Z canonical: "docs.trellix.com/add-a-new-nms-ip-address-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a new NMS IP address NMS IP addresses can be added from the device and from the domain. **Steps:** 1. To add a new NMS IP address: - From the **Global** tab, select **Devices** → **** → **Global** → **Common Device Settings** → **Remote Access** → **NMS** → **NMS Devices**. - From the **Device** tab, select **Devices** → **** → **Devices** → **** → **Setup** → **Remote Access** → **NMS** → **NMS Devices**. 2. Click ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-72053356-4c05-0f24-325f-27e024879a39(3).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A28%3A47Z&se=2026-11-20T11%3A28%3A47Z&sr=c&sp=r&sig=Z%2BUcugRag7Qm%2Ff%2FHaYD3wmBuyXf%2FGHsY6TH76qkmHTY%3D). **Add NMS IP dialog**![Add NMS IP dialog](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fa69a493-6675-66c7-eb3f-fc0ba17c9291.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A28%3A47Z&se=2026-11-20T11%3A28%3A47Z&sr=c&sp=r&sig=Z%2BUcugRag7Qm%2Ff%2FHaYD3wmBuyXf%2FGHsY6TH76qkmHTY%3D) The **Add NMS IP** page is displayed. 3. In **IP Address**, enter the NMS IP address. You can enter either IPv4 or IPv6 address. > [!NOTE] > Note > > From 11.1 Update 9 release, while adding **NMS IP address**, you can add a maximum of 50 IPv4 addresses and 50 IPv6 addresses. 4. Click **Save**.