--- title: "Add a new NMS IP address" slug: "add-a-new-nms-ip-address" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:38:58Z published: 2026-09-23T09:38:58Z canonical: "docs.trellix.com/add-a-new-nms-ip-address" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a new NMS IP address NMS IP addresses can be added from the device and from the domain. ## Task 1. To add a new NMS IP address: - From the **Global** tab, select **Devices** → **** → **Global** → **Common Device Settings** → **Remote Access** → **NMS** → **NMS Devices**. - From the **Device** tab, select **Devices** → **** → **Devices** → **** → **Setup** → **Remote Access** → **NMS** → **NMS Devices**. 2. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A10%3A18Z&se=2026-11-20T07%3A10%3A18Z&sr=c&sp=r&sig=jsLIPZxLcQIxYy52MTHXf9LFmBV1FlnPmUzimMr6SLg%3D). Add NMS IP dialog ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-40BFAD85-BF96-4D6D-AACC-F1354652F3E1-low.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A10%3A18Z&se=2026-11-20T07%3A10%3A18Z&sr=c&sp=r&sig=jsLIPZxLcQIxYy52MTHXf9LFmBV1FlnPmUzimMr6SLg%3D) The **Add NMS IP** page is displayed. 3. In **IP Address**, enter the NMS IP address. You can enter either IPv4 or IPv6 address. > [!NOTE] > Note > > While adding **NMS IP address**, you can add a maximum of 10 IPv4 addresses and 10 IPv6 addresses. 4. Click **Save**.