Add a new NMS user

NMS users can be added from the device and from the domain.

Steps:

To add a new NMS user:
- From the Global tab, select Devices → <Admin Domain Name> → Global → Common Device Settings → Remote Access → NMS → NMS Users.
- From the Device tab, select Devices → <Admin Domain Name> → Devices → <Device_Name> → Setup → Remote Access → NMS → NMS Users.
Click .
Add NMS User Account dialog

The Add NMS User Account dialog is displayed.
Enter the User Name.
Note
The length of the user name should be between 8 to 31 characters. It can consist of alphabets and numerals. Special characters and spaces are not allowed.
Enter the Authentication Key (re-enter at Confirm Authentication Key).
Enter the Private Key (re-enter at Confirm Private Key).
Note
The length of the Authentication and Private key should be between 8 to 15 characters.
Note
Since the communication is over SNMP version 3, the supported authentication protocol is "SHA1" and encryption algorithm is "AES128".
Click Save.
The user is now added to the device and is displayed in the NMS User table.