--- title: "Add a new NMS user" slug: "add-a-new-nms-user-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:53:55Z published: 2026-11-19T12:53:55Z canonical: "docs.trellix.com/add-a-new-nms-user-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a new NMS user NMS users can be added from the device and from the domain. **Steps:** 1. To add a new NMS user: - From the **Global** tab, select **Devices** → **** → **Global** → **Common Device Settings** → **Remote Access** → **NMS** → **NMS Users**. - From the **Device** tab, select **Devices** → **** → **Devices** → **** → **Setup** → **Remote Access** → **NMS** → **NMS Users**. 2. Click ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-72053356-4c05-0f24-325f-27e024879a39(3).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A43Z&se=2026-11-20T12%3A08%3A43Z&sr=c&sp=r&sig=wUoyvOpu91iOO4pNnA8JfpP8bpoqQwFzQZiftV9as88%3D). **Add NMS User Account dialog**![Add NMS User Account dialog](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-90aae141-4081-2772-2dfe-e02e2dc767b3.jpg?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A43Z&se=2026-11-20T12%3A08%3A43Z&sr=c&sp=r&sig=wUoyvOpu91iOO4pNnA8JfpP8bpoqQwFzQZiftV9as88%3D) The **Add NMS User Account** dialog is displayed. 3. Enter the **User Name**. > [!NOTE] > Note > > The length of the user name should be between 8 to 31 characters. It can consist of alphabets and numerals. Special characters and spaces are not allowed. 4. Enter the **Authentication Key** (re-enter at **Confirm Authentication Key**). 5. Enter the **Private Key** (re-enter at **Confirm Private Key**). > [!NOTE] > Note > > The length of the Authentication and Private key should be between 8 to 15 characters. > [!NOTE] > Note > > Since the communication is over SNMP version 3, the supported authentication protocol is "SHA1" and encryption algorithm is "AES128". 6. Click **Save**. The user is now added to the device and is displayed in the **NMS User** table.