--- title: "Add a new NMS user" slug: "add-a-new-nms-user" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:36:53Z published: 2026-09-23T09:36:53Z canonical: "docs.trellix.com/add-a-new-nms-user" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a new NMS user NMS users can be added from the device and from the domain. ## Task 1. To add a new NMS user: - From the **Global** tab, select **Devices** → **** → **Global** → **Common Device Settings** → **Remote Access** → **NMS** → **NMS Users**. - From the **Device** tab, select **Devices** → **** → **Devices** → **** → **Setup** → **Remote Access** → **NMS** → **NMS Users**. 2. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A53%3A56Z&se=2026-11-20T07%3A53%3A56Z&sr=c&sp=r&sig=WJ3As2bjrGgavmD5Q2wjOj1RJBdVH%2B5WVyAJE09zxIQ%3D). Add NMS User Account dialog ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-AF08D93E-4DC8-4770-8B32-2A96EC9B638C-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T06%3A53%3A56Z&se=2026-11-20T07%3A53%3A56Z&sr=c&sp=r&sig=WJ3As2bjrGgavmD5Q2wjOj1RJBdVH%2B5WVyAJE09zxIQ%3D) The **Add NMS User Account** dialog is displayed. 3. Enter the **User Name**. > [!NOTE] > Note > > The length of the user name should be between 8 to 31 characters. It can consist of alphabets and numerals. Special characters and spaces are not allowed. 4. Enter the **Authentication Key** (re-enter at **Confirm Authentication Key**). 5. Enter the **Private Key** (re-enter at **Confirm Private Key**). > [!NOTE] > Note > > The length of the Authentication and Private key should be between 8 to 15 characters. > [!NOTE] > Note > > Since the communication is over SNMP version 3, the supported authentication protocol is "SHA1" and encryption algorithm is "AES128". 6. Click **Save**. The user is now added to the device and is displayed in the **NMS User** table.