--- title: "Add a proxy rule" slug: "add-a-proxy-rule-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:47Z published: 2026-11-19T12:28:47Z canonical: "docs.trellix.com/add-a-proxy-rule-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a proxy rule To add a proxy rule, perform the following steps: 1. Select **Devices** → **** → **Global** → **IPS Device Settings** → **TLS Decryption**. 2. In the **Inbound** tab, select **Inbound Proxy Rules** tab. > [!TIP] > Tip > > To configure an outbound proxy rule, go to **Outbound** tab, and select **Outbound Proxy Rules** tab. 3. Click ![GUID-002605CA-A671-41C2-AC91-CCE74A6CB27E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9d3045ce-12f2-7972-e28b-71bc39197745(7).png?sv=2026-02-06&spr=https&st=2026-11-20T15%3A52%3A51Z&se=2026-11-20T16%3A52%3A51Z&sr=c&sp=r&sig=HG0aiCpc%2FcVPEQnrOSvDLeLH3r5odouDLpOxaHhPibE%3D) to add a rule above the selected rule. Click ![GUID-01632DAF-E14F-4696-93EF-18654509F3B8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2457ff78-7e7b-d691-f55e-517ce8f112ed(7).png?sv=2026-02-06&spr=https&st=2026-11-20T15%3A52%3A51Z&se=2026-11-20T16%3A52%3A51Z&sr=c&sp=r&sig=HG0aiCpc%2FcVPEQnrOSvDLeLH3r5odouDLpOxaHhPibE%3D) to add a rule below the selected rule. The rule details pane opens. 4. Enter the name of the rule. 5. Enter the IPv4 or IPv6 CIDR of the web server you wish to protect. 6. Enter the comment for the rule. 7. Go to **Server Certificates** and select the required server certificate from the drop down. > [!WARNING] > Important > > - For inbound rules, configure server certificates as known key certificates. For outbound rules, use resigning certificates. 8. Go to **Client Certificates** and select the required client certificate from the drop down. 9. Click **Add**. 10. (Optional) Click **Set as default** to set the selected web server certificate as default certificate. The **Installed On** pane displays the Sensor on which the web server certificate is saved on. > [!WARNING] > Important > > From 11.1 Update 8 release, once Inbound Proxy is enabled, all Inbound traffic will be decrypted; a proxy rule with a specific web server IP is not required for proxy decryption. > [!NOTE] > Note > > If you do not specifically set a default, the first certificate in the list is set as the default certificate. > [!NOTE] > Note > > If the server supports Server Name Indication (SNI), multiple certificates must be available in the Sensor. 11. Click **Save** to save the rule order details.