--- title: "Add a stack to the Manager" slug: "add-a-stack-to-the-manager" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:58Z published: 2026-10-05T15:39:58Z canonical: "docs.trellix.com/add-a-stack-to-the-manager" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a stack to the Manager To add a stack of Sensors to the Manager, perform the following steps: ## Task 1. Go to **Devices** → **** → **Global** → **Device Manager** → **Stacks** page. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-AC259F92-3777-44B3-BAF7-D68BFFE1F03B-low.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A03%3A39Z&se=2026-11-20T09%3A03%3A39Z&sr=c&sp=r&sig=qk5qQLyLad9xYBLggaQEkTQrQwtlxvlQxPjABTIgI8A%3D) 2. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A6ACF06E-8B7C-4F33-9335-99E4B1FDEB3D-low(2).png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A03%3A39Z&se=2026-11-20T09%3A03%3A39Z&sr=c&sp=r&sig=qk5qQLyLad9xYBLggaQEkTQrQwtlxvlQxPjABTIgI8A%3D) to add a new stack. The **Stack Details** window opens. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-34FA1C1D-EDB8-47D5-948D-EF59EE660762-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A03%3A39Z&se=2026-11-20T09%3A03%3A39Z&sr=c&sp=r&sig=qk5qQLyLad9xYBLggaQEkTQrQwtlxvlQxPjABTIgI8A%3D) 3. Enter the following mandatory information in the appropriate fields. - **Stack Name** — The stack name must begin with a letter. The maximum length of the name is 25 characters. - **Shared Secret** — The shared secret must be a minimum of 8 characters and maximum of 25 characters in length. The key cannot start with an exclamation mark nor can have any spaces. The parameters that you can use to define the key are: > [!NOTE] > Note > > The Sensor stack name and node ID and shared secret key that you enter in the Manager must be identical to the shared secret that you will later enter during physical installation or initialization of the Sensor (using CLI). If not, the Sensor will not be able to register itself with the Manager. - 26 alphabets: Uppercase and lowercase (A, B, C,...Z and a,b,c,...z) - 10 digits: 0 1 2 3 4 5 6 7 8 9 - 32 symbols: ~ ` ! @ # $ % ^ & * ( ) _ + ‑ = [ ] { } \ | ; : " ' , . [!NOTE] > Note > > Selecting **Indirect** enables Offline Sensor update. **Direct** is the default mode. 4. Click **Save**. The new stack in displayed in the **Stacks** window. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-D0D12730-DDA1-43D4-8B4E-9BA53272F672-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A03%3A39Z&se=2026-11-20T09%3A03%3A39Z&sr=c&sp=r&sig=qk5qQLyLad9xYBLggaQEkTQrQwtlxvlQxPjABTIgI8A%3D) In the **Sensors** page, the member Sensor instances are displayed in the **** format. For example, ****, ****, and so on. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-351037F8-367D-4D9F-9141-5E0CA10629BA-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A03%3A39Z&se=2026-11-20T09%3A03%3A39Z&sr=c&sp=r&sig=qk5qQLyLad9xYBLggaQEkTQrQwtlxvlQxPjABTIgI8A%3D) 5. Using the Sensor CLI, configure the Sensors with the same name and node ID as the names displayed in the **Sensors** page. 6. In the Manager, go to **Manager** → **** → **Setup** → **Licenses** and upload the license for the stack. You must manually push the configuration after the license is assigned to the stack.