--- title: "Add a Stateless Scanning Exception" slug: "add-a-stateless-scanning-exception-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:25:43Z published: 2026-11-19T12:25:43Z canonical: "docs.trellix.com/add-a-stateless-scanning-exception-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a Stateless Scanning Exception Make sure the Sensor for which you want to create a Stateless Scanning Exception is active and reachable to the Manager over the network. 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. In the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Setup** → **Advanced** → **Stateless Scanning Exception**. 6. Click ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a265d0b5-4039-16f5-7bb1-cb4512697e13(8).png?sv=2026-02-06&spr=https&st=2026-11-20T16%3A10%3A56Z&se=2026-11-20T17%3A10%3A56Z&sr=c&sp=r&sig=sacLxqCvGOlDRpmO5Fu8ZNYNfrc7jm9iOV4v3QULU7A%3D). The **Add a Scanning Exception** page appears. **Add Scanning Exception page**![Add Scanning Exception page](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-63c710b2-2e63-7246-4348-b367c2e5e9ac(7).png?sv=2026-02-06&spr=https&st=2026-11-20T16%3A10%3A56Z&se=2026-11-20T17%3A10%3A56Z&sr=c&sp=r&sig=sacLxqCvGOlDRpmO5Fu8ZNYNfrc7jm9iOV4v3QULU7A%3D) 7. In the **Type** field, select the type of port to be set for scanning exception. The options are **TCP**, **UDP**, and **VLAN**. 8. Specify the port number or a range of port numbers in the **Ports** field. - If you are configuring a range of port numbers for scanning exceptions, select **A Range of Ports from** and type the range of the port numbers in the respective fields. - If you select VLAN in the **Type** drop-down list, a new field **Interface** is displayed. You can select the required interface from the drop-down list. 9. Click **Save**. After the scanning exception is added, the **Scanning Exceptions** page displays the **Value** (Port number) and the **Resource** (Device name) under the **TCP Rules**, **UDP Rules**, and **VLAN Rules** tables.