Make sure the Sensor for which you want to create a Stateless Scanning Exception is active and reachable to the Manager over the network.
Click the Devices tab.
Select the domain from the Domain drop-down list.
In the left pane, click the Devices tab.
Select the device from the Device drop-down list.
Select Setup → Advanced → Stateless Scanning Exception.
Click
.png)
.The Add a Scanning Exception page appears.
Add Scanning Exception page.png "GUID-C6D5A5F7-ECBC-4616-AE2B-E4613FF46D00-low.png")
In the Type field, select the type of port to be set for scanning exception.
The options are TCP, UDP, and VLAN.
Specify the port number or a range of port numbers in the Ports field.
If you are configuring a range of port numbers for scanning exceptions, select A Range of Ports from and type the range of the port numbers in the respective fields.
If you select VLAN in the Type drop-down list, a new field Interface is displayed. You can select the required interface from the drop-down list.
Click Save.
After the scanning exception is added, the Scanning Exceptions page displays the Value (Port number) and the Resource (Device name) under the TCP Rules, UDP Rules, and VLAN Rules tables.