--- title: "Add a Stateless Scanning Exception" slug: "add-a-stateless-scanning-exception" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:08Z published: 2026-10-05T15:40:08Z canonical: "docs.trellix.com/add-a-stateless-scanning-exception" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a Stateless Scanning Exception ## Before you begin Make sure the Sensor for which you want to create a Stateless Scanning Exception is active and reachable to the Manager over the network. ## Task 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. In the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Setup** → **Advanced** → **Stateless Scanning Exception**. 6. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A6ACF06E-8B7C-4F33-9335-99E4B1FDEB3D-low(2).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A34Z&se=2026-11-20T12%3A08%3A34Z&sr=c&sp=r&sig=CBYCrsYlNxgvgNUWweP99UuDS6n%2BomW6oLqDEKujSDY%3D). The **Add a Scanning Exception** page appears. Add Scanning Exception page ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-C6D5A5F7-ECBC-4616-AE2B-E4613FF46D00-low.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A34Z&se=2026-11-20T12%3A08%3A34Z&sr=c&sp=r&sig=CBYCrsYlNxgvgNUWweP99UuDS6n%2BomW6oLqDEKujSDY%3D) 7. In the **Type** field, select the type of port to be set for scanning exception. The options are **TCP**, **UDP**, and **VLAN**. 8. Specify the port number or a range of port numbers in the **Ports** field. - If you are configuring a range of port numbers for scanning exceptions, select **A Range of Ports from** and type the range of the port numbers in the respective fields. - If you select VLAN in the **Type** drop-down list, a new field **Interface** is displayed. You can select the required interface from the drop-down list. 9. Click **Save**. After the scanning exception is added, the **Scanning Exceptions** page displays the **Value** (Port number) and the **Resource** (Device name) under the **TCP Rules**, **UDP Rules**, and **VLAN Rules** tables.