--- title: "Add a Suricata Sensor as a stack to the Manager" slug: "add-a-suricata-sensor-as-a-stack-to-the-manager" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/add-a-suricata-sensor-as-a-stack-to-the-manager" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a Suricata Sensor as a stack to the Manager The following steps describe how to add stacked Suricata Sensors to the Manager: 1. Start the Manager software. 2. Log in to the Manager (the default username is `admin` and the default password is `admin123`). 3. To add stacked Sensors in the Manager, go to **Devices** → **** → **Global** → **Device Manager**, then select **Stacks** tab. The **Stacks** tab is displayed. See [Stacks](/network-and-platform/docs/stacks) for more information. 4. Click ![GUID-4C6E7917-5620-4343-A8F5-4AFBBB613541-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e36bda9b-e727-de4a-6ebd-a99e99ff838e.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A08%3A05Z&se=2026-11-20T09%3A08%3A05Z&sr=c&sp=r&sig=a1sKrv6ODsqXrGTSyGJuEwzepyGkGX7B6opLf1dDlO8%3D) to add a new stack. The **Stack Details** window opens. 5. Enter the following mandatory information in the appropriate fields. - **Stack Name** — The stack name must begin with a letter. The maximum length of the name is 25 characters, including numbers, hyphens, underscore, periods, and letters. - **Device Type** — Select **Suricata Stack** from the drop-down. - **Model Type** — Select **IPS-NS9600** Sensor model for stacking. - **Shared Secret** — The shared secret must be a minimum of 8 characters and maximum of 25 characters in length. The key cannot start with an exclamation mark nor can have any spaces. The parameters that you can use to define the key are listed below: - 26 alphabets: Uppercase and lowercase (A, B, C,...Z and a,b,c,...z) - 10 digits: 0 1 2 3 4 5 6 7 8 9 - 31 symbols: ~ ` ! @ # $ % ^ & * ( ) _ + ‑ = [ ] { } \ | ; : " ' , . < / > [!NOTE] > Note > > The Sensor stack name and node ID and shared secret key that you enter in the Manager must be identical to the shared secret that you will enter later during physical installation or initialization of the Sensor (using CLI). If not, the Sensor will not be able to register itself with the Manager. - **Confirm Shared Secret** — Confirm the shared secret key. - **Capacity** — Select **120 Gbps** from the drop-down. - **Sync Mode** — By default, **Direct** mode is selected. > [!NOTE] > Note > > Selecting **Indirect** enables Offline Sensor update. - **Comment** — (Optional) Enter any comments about the stack being added. 6. Click **Save**. An informational message window appears showing the names of the member Sensors in the stack. Click **OK** to confirm the changes. 1. A warning pop-up appears on screen, if there is no valid license assigned to the stack being configured. Click **OK** to proceed with the license assignment task. 2. **Capacity license for: ** window appears, showing a list of the licenses in use by the stack (if any) ,with details such as **Grant ID**, **Capacity**, **Key,** and **Expiration**. A 120 Gbps throughput license is required for a NS9600 Suricata stack of 2 nodes to run. To do so, click **Change License**. 3. **Assign or Change license for ** window appears. Select the required capacity license(s) from the list of licenses already added to the Manager and click **Assign**. If you need to add the required license to the Manager, click ![GUID-4C6E7917-5620-4343-A8F5-4AFBBB613541-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e36bda9b-e727-de4a-6ebd-a99e99ff838e.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A08%3A05Z&se=2026-11-20T09%3A08%3A05Z&sr=c&sp=r&sig=a1sKrv6ODsqXrGTSyGJuEwzepyGkGX7B6opLf1dDlO8%3D) and follow the steps outlined in [Add a license to the Manager](/network-and-platform/docs/add-license-to-the-manager). Once added to the Manager, assign the selected license to the stack. 4. An informational message appears showing that the required license(s) have been assigned to the stack. Click **OK**. > [!NOTE] > Note > > Alternatively, you can assign licenses to the stacked NS9600 Sensors by clicking ![assignlicense_button.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9e698fca-89e7-135f-aa40-f6a7585bf7fe(1).jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A08%3A05Z&se=2026-11-20T09%3A08%3A05Z&sr=c&sp=r&sig=a1sKrv6ODsqXrGTSyGJuEwzepyGkGX7B6opLf1dDlO8%3D) icon under the **License** field of the required stack on the **Stacks** tab of the **Device Manager** page. The new stack in displayed on the **Stacks** tab. 5. You must manually push the configuration after the license is assigned to the stack. For more information on licenses, see [Management of NS9600 Sensor licenses](/network-and-platform/docs/management-of-ns9600-sensor-licenses). 7. Close the **Stacks** tab. In the **Device Manager** page, the member Sensor instances are displayed as **** (for example, **** and ****). | Capacity | Sensor name | | --- | --- | | 120 Gbps | **** **** | 8. Using the Sensor CLI, configure the Sensors with the same name and node ID as the names displayed in the **Device Manager** page.