--- title: "Add a Suricata Sensor as a standalone to the Manager" slug: "add-a-suricata-sensor-as-a-standalone-to-the-manager" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/add-a-suricata-sensor-as-a-standalone-to-the-manager" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a Suricata Sensor as a standalone to the Manager The following steps describe how to add a Suricata standalone Sensor to the Manager: **Steps:** 1. Log on to the Manager using the default user name `(admin)` and password `(admin123)`. 2. Go to **Devices** → **** → **Global** → **Device Manager**. The **Device Manager** page is displayed. 3. Select the **Sensors** tab and then click ![GUID-71DF5E54-EE2A-4370-8FF4-05527C15BF0B-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-41751703-3d7c-707e-84e8-b28f3ced490c.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A04%3A01Z&se=2026-11-20T09%3A04%3A01Z&sr=c&sp=r&sig=1Id2LdPHEyGHC9NxytZIGknvOt%2FC9P%2BWVANhWBbRrVY%3D). > [!NOTE] > Note > > You do not require a license file to enable IPS on NS-series Sensors. The **Add Devices - Step 1 of 2** panel is displayed. ![GUID-7568E94D-D3CF-4AAF-BEE6-C96F526A8C23-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-43690202-6143-1a25-c798-b0e9143e0589.jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A04%3A01Z&se=2026-11-20T09%3A04%3A01Z&sr=c&sp=r&sig=1Id2LdPHEyGHC9NxytZIGknvOt%2FC9P%2BWVANhWBbRrVY%3D) 4. Enter the following mandatory information in the appropriate fields: - **Name** — The Sensor name must begin with a letter. The maximum length of the name is 25 characters. - **Shared Secret** — The shared secret must be a minimum of 8 characters and maximum of 25 characters in length. The key cannot start with an exclamation mark nor can have any spaces. The parameters that you can use to define the key are listed below: - 26 alphabets: Uppercase and lowercase (A, B, C,...Z and a,b,c,...z) - 10 digits: 0 1 2 3 4 5 6 7 8 9 - 31 symbols: ~ ` ! @ # $ % ^ & * ( ) _ + ‑ = [ ] { } \ | ; : " ' , . < / Retype the password in **Confirm Shared Secret**. > [!NOTE] > Note > > The Sensor name and shared secret key that you enter in the Manager must be identical to the shared secret that you will enter later during physical installation or initialization of the Sensor (using CLI interface) as stated in the Configure Sensor information section. If not, the Sensor will not be able to register itself with the Manager. - **Device Type** — Specifies the type of device to be added. Select **Suricata Sensor**. - **Deployment Mode** — Select **Direct** or **Indirect**. > [!NOTE] > Note > > Selecting **Direct** enables online Sensor update. **Direct** is the default mode. - **Contact Information** — (Optional) Type the contact information. - **Location** — (Optional) Type the location. - **Comment** — (Optional) Type the comment. 5. Click **Save**. The added Sensor is displayed on the **Sensors** tab of **Device Manager** page. To add and assign a license to the standalone Sensors, you can use both the **Licenses** and **Device Manager** page in the Manager. See [Management of NS9600 Sensor licenses](/network-and-platform/docs/management-of-ns9600-sensor-licenses) for more details.