You can add server profiles that will be populated in the Target Server drop-down list on the Add a Syslog Notification Profile page.
Click Add beside the Target Server drop-down list.
The Add a Syslog Server Profile page is displayed.
.png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A40%3A41Z&se=2026-11-20T13%3A51%3A41Z&sr=c&sp=r&sig=ztGt7WwZ6nAX92%2BmnROdD17t%2Fv%2BpeQjnRKFqrO28djA%3D)
Enter the Target Server Profile Name.
Enter the Syslog Server Name or IP Address. The server name or IP address (IPv4/IPv6) of the target Syslog server.
Note
The length of server name has been increased to support up to 255 characters from 40 characters.
Select TCP or UDP from the Protocol drop-down list.
Note
If you select the TCP protocol:
You will have to provide a certificate when you select the Use SSL checkbox.
Click Test Connection to check if the connection is successful. If a TCP server is down, at least five attempts will be made to ping the server before a fault is raised.
Specify the port. By default, the port is set to 514.
Click Save.
Now you can select the server where you want to forward the alert.