--- title: "Add a syslog server profile" slug: "add-a-syslog-server-profile-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:57Z published: 2026-11-19T12:27:57Z canonical: "docs.trellix.com/add-a-syslog-server-profile-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a syslog server profile You can add server profiles that will be populated in the **Target Server** drop-down list on the **Add a Syslog Notification Profile** page. 1. Click **Add** beside the **Target Server** drop-down list. The **Add a Syslog Server Profile** page is displayed. ![GUID-8490E71F-02B1-4325-9CCD-3A07C57F8830-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3e5fccbe-1a3d-ed2c-e6a6-1003697ef0b3(7).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A50%3A10Z&se=2026-11-20T14%3A50%3A10Z&sr=c&sp=r&sig=yQ63DFvoRaKF%2FNQO48hxy7%2B1%2FNNZW1SUllVEe9xEpIE%3D) 2. Enter the **Target Server Profile Name**. 3. Enter the **Syslog Server Name or IP Address**. The server name or IP address (IPv4/IPv6) of the target Syslog server. > [!NOTE] > Note > > The length of server name has been increased to support up to 255 characters from 40 characters. 4. Select *TCP* or *UDP* from the **Protocol** drop-down list. > [!NOTE] > Note > > If you select the TCP protocol: > > - You will have to provide a certificate when you select the **Use SSL** checkbox. > - Click **Test Connection** to check if the connection is successful. If a TCP server is down, at least five attempts will be made to ping the server before a fault is raised. 5. Specify the port. By default, the port is set to 514. 6. Click **Save**. Now you can select the server where you want to forward the alert.